4port ADSL2+ Wireless Modem

Product Description

Features:
Supports G. DMT. Bis full-rate, G. Lite Bis and ADSL2 Plus connectivity.
Advanced with 125Mbps (802.11g) to power the LAN & WAN link for your entire office
Including friendly installation and maintenance via Ethernet port
Specification:
Line Connection
- RJ-11(2 wires), RJ-45 (4 port) Connection
ADSL Features
- DMT modulation and demodulation
- Tone detection for low power mode
ITU 992.1 (G. Dmt) Annex A, B, C
ITU 992.2 (G. Lite)
ITU 992.3 ADSL2 (G. Dmt. Bis)
ITU 992.4 ADSL2 (G. Lite. Bis)
ITU 992.5 ADSL2 Plus
ANSI T1.413 Issue 2

Full-rate adaptive modem
- Maximum downstream rate of 24 Mbps(ADSL2 )/1.5 Mbps( G. Lite)
- Maximum upstream rate of 512 Kbps

WAN Mode Support
- PPP over ATM (RFC 2364)
- PPP over Ethernet (RFC 2516)

LAN Mode Support
- Bridged/routed Ethernet over ATM (RFC 2684/1483)
- Classical IP over ATM (RFC 1577) and PPP over Ethernet
(RFC 2516)

Bridge Mode Support
- Ethernet to ADSL self-learning Transparent Bridging
(IEEE 802.1D)
- Supports up to 128 MAC learning addresses

Router Mode Support
- IP routing-RIPv2 (backward compatible with RIPv1)
- Static routing
- DHCP (Dynamic Host Configuration Protocol) Server and Client
- NAPT (Network Address and Port Translation)
- NAT (Network Address Translation)
- ICMP (Internet Control Message Protocol)
- Simultaneous USB and Ethernet operation
- IGMP (Internet Group Management Protocol)
- UpnP supported
- NAT Firwall(ALG), Rule-based Policy firewall, System log, Firewall for DoS attack, URL Filter, Access Control, Local Password
- VPN Pass Throug ( PPTP, L2TP)
- Support DDNS ( Dynamic DNS )

802.11g+ Wireless Access Point
- 125M/54Mbps Access Point for wireless connectivity
- Interoperable with IEEE 802.11g+/g
(PBCC & OFDM Modulation Technology supports) 2.4GHz
Compliant equipment
- Supports full mobility and seamless roaming from cell to cell
- Support Ad hoc and Infrastructure mode
- Support AP client architecture
- Support WEP (64/128/256 bit), 802.1x, WPA
- Work range: Per node indoors approximately 30m~100m, outdoors (line of sight) 200m~300m
Antenna
- one 2dbi detachable antennas with diversity support
(Reverse SMA connector)
Ethernet Features
- Four RJ-45 connectors for 10/100 Mbps Ethernet LAN connection,
DMZ function can be set up between them
- Complies with IEEE 802.3u specification
- Supports Auto-Negotiation
- Supports Auto-MDIX, Auto-MDI
- Supports IEEE 802.3x Flow control in Full Duplex mode
PTT and Safety
- FCC Part 15, CE,
Operating System
- Win 98SE/2000/ME/XP OR Mac
Power
- Input: 100/230/240V; 50/60Hz
- Output: 7.5 VDC/1.5A

LED Indication
- Power, ADSL LINK, WLAN, LAN PORT1~4

Software Upgrade
- Upgrade by Ethernet Port